The making of rope fenders for both inland and saltwater craft.
|Historic area of significance
|Area currently practised
|Origin in the UK
|Current no. of professionals (main income)
|Current no. of professionals (sideline to main income)
|Current no. of trainees
|Current total no. serious amateur makers
|Current total no. of leisure makers
As far as the inland waterways goes originally the fender would be built round a core of rope. There have been replacement cores used based on rolls of old tyre, rolls of carpet underlay and now moulded solid rubber cores. It can be debated if a move away from a complete rope core makes the fender traditional even if it has a similar outwards appearance.
Fenders for salt water craft could have a core of old rope but side fenders may use chips of cork, indeed historically some makers specified that they were ‘Ships Cork Fender Makers’. The number of fenders made for sea going vessels is very small and mainly is for bow fenders or occasionally a rope fender that goes all round the vessel (this style is more common in the Netherlands). The use of rubber tyres and inflatable plastic fenders has all but killed the salt water trade in side fenders.
There are two types of fender making, the main differences being in the patterns of the fenders and the vessels they are fitted to:
- fenders for narrow boats and the inland waterways
- fenders for maritime boats and classic boats
There are differing style associated with various parts of the canal system and the hauling companies. The Royal Navy had their own style as did the Royal National Lifeboat Institution (RNLI).
- Decorative sailors ropework.
Issues affecting the viability of the craft
- The hard physical work means that craftspeople cannot continue to produce in a commercial quantity as they get older.
- Very modest demand for fenders for saltwater craft.
- There is an overseas demand for fenders in the US and Europe and some fender makers are sending a significant amount of work overseas.
- Rope fenders can be made bespoke and so can be more appropriate in some maritime situations
Craftspeople currently known
- Phil English, Gascote Fender Makers, Staffordshire
Des Pawson, Ipswich (semi-retired)
Get Knotted, Warwick
Black Pig Fenders, Spalding
- Pete Flockhart, Tradline Rope and Fenders, Northamptonshire
- Laura, The Fender Boat
- Trafalgar Marine Services Ltd
- Paul Midgely, Fender Knot
- Victoria Rayner, The Fender Boutique
Eric Johns retired in 2017.
There are no full-time fender makers specialising in fenders for saltwater craft.
- Jones, Colin R, (1996) The Fender Book
- Selfe, Ben, (2008) Knots for the Cut (Quicksilver Publications)
- Popple, Leonard, (1959) Advanced Ropeworking (Glasgow: Brown Son & Ferguson)
- Pawson, Des, (2016) Des Pawson’s Knot Craft & Rope Mats (London: Adlard Coles)